PCB V-cut separator can separate up to 20 PCBs simultaneously, it mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this type PCB separator can satisfy for the 3-5 SMT line output. Almost cover the PCB cutting in the whole factory.
Features:
* Multi PCB V-cut separator equipped with multiple sets of cutting wheel which can separate the whole PCB panel at one time.
* The distance between upper and lower cutter can be precisely adjusted, the separating
thickness of PCB range is : 0.8MM-3.0MM.
* Suitable separating material of PCB :aluminum ,FR4,glass fiber.
* This PCB V-cut separator with 2 cutting module and 3 cutting module optional via the PCB board material.The whole cutting process is divided into 2 or 3 stages. The stress of the cutting process can be reduced by 80% than the traditional one-cut process for the small cutting quantity each time. And the edges of the board are quite smooth and won’t bend and twist after cutting.
* Unique bar design, can quickly separating the edge of the LED board, for the development of LED aluminum substrate, also suitable for other long LED panel.
* Can install the SMEMA port and customized to be the online version PCB V-cut separator, it can connect to the full automatic SMT assembly line. And achieve the intelligent production demand.
ASCEN as a PCB separator manufacturer provide the full SMT manufacturing equipment, producing different type PCB depaneling machine, include the blade moving type V-cut PCB separator, cutting disc type PCB cutting separator , Pneumatic cutting type PCB separator , Aluminum PCB separator , PCB punching separator , manual pcb separator, PCB depaneling router, Multi cutter PCB cutting machine are available as standard and customized products and can be equipped to fit special requirements
Item |
Scope of application |
Model number
(PCB V-cut separator) |
ASC-900N |
Dimensions(L*W*H) |
2160*570*1050mm |
Cutting speed |
200-400mm/s |
Power |
500W |
PCB Board thickness |
0.2-3mm |
Maximum PCB board length |
Unlimited |
Maximum cutting width |
280mm |
Minimum cutting width |
8mm |
Minimum cutting length |
250mm |
Working temperature |
10-35 degree |
PCB maximum component height |
15mm |
Power Supply |
1P AC220V 50Hz or 110V/60Hz |